Verco MD2010 Assembly Manual

step 1

join 2x corner leg assemblies together with 1 of
the depth rails supplied.
secure the rail to leg bracket by un-winding (anti-
clockwise) the bolts within the U channel
connectors.
these bolts are accessed through the holes in the
rails & leg brackets
1 x depth rail
A
DETAIL A
2 x
Martin Corner Leg
sub assembly

step 2

join both end section from (step1) using 2x length
rails, sliding them on to the u channel connectors
and securing as in step 1.
2 x
length rail
B
DETAIL B
martin 4 leg desk/meeting table frame
VERCO OFFICE FURNITURE LIMITED
CHAPEL LANE, SANDS, HIGH WYCOMBE. HP12 4BG
+44 (0) 01494 448000 www.verco.co.uk
assembly