The fastening tool, gas can, battery and fasteners form a technical unit. This means that trouble-free
fastening with this fastening tool can be ensured only when it is used together with the fasteners, gas cans
and batteries specially manufactured for it by Hilti. The fastening and application recommendations made
by Hilti apply only when these conditions are observed.
The fastening tool is for hand-held use only.
▶ Use only Hilti Liion batteries of the B 12 series with this product.
▶ Use only Hilti battery chargers of the C 4/12-50 series for charging these batteries.
3.3
Items supplied
Gas-actuated fastening tool with fastener guide, 2 batteries, charger, toolbox and operating instructions.
Other system products approved for use with this product can be found at your local Hilti Center or online
at: www.hilti.group
3.4
Fastener guide
The fastener guide holds the insulation plug and in the driving process it directs the fastener to the desired
position in the material.
3.5
Fastener guide release slider
In the EJECT position, the slider releases the fastener guide for removal.
Status
EJECT
3.6
Belt hook
The belt hook can be extended in three stages.
Status
Position 1
Position 2
Position 3
3.7
Gas can
Observe the safety instructions provided with the gas can!
In order to operate the fastening tool, the gas can must be inserted in the gas can compartment.
The gas can status can be read from the LED display after pressing the GAS button.
The gas can must be removed before breaks between working, before maintenance and before transporting
or storing the fastening tool.
Printed: 07.05.2018 | Doc-Nr: PUB / 5426517 / 000 / 00
Meaning
•
Fastener guide release
Meaning
•
Position for attaching to a waist belt
•
Position for attaching to ladders, scaffolds,
platforms, etc.
•
Belt hook removed
English
7