Indication Of Gas Can Status; Indication Of Battery Charge Status; Technical Data; Fastening Tool - Hilti GX-IE Manual

3.8

Indication of gas can status

After pressing the GAS button, the LED display indicates the status of the gas can.
Status
All four LEDs light green.
Three LEDs light green.
Two LEDs light green.
One LED lights green.
One LED blinks green.
One LED blinks red.
3.9

Indication of battery charge status

After pressing a battery release button, the display shows the status of the battery and the fastening tool.
Status
All four LEDs light green.
Three LEDs light green.
Two LEDs light green.
One LED lights green.
One LED blinks green.
4

Technical data

4.1

Fastening tool

Weight (empty) GX-IE
Weight (empty) GX-IE XL
Tool length for GX-IE
Tool length for GX-IE XL
Application temperature, ambient temperature
Maximum fastener length for GX-IE
Maximum fastener length for GX-IE-XL
Fastener diameter
Compression stroke
Maximum fastener driving frequency (Fasteners per hour)
Maximum magnetic field strength
Frequency
4.2

Noise information and vibration values

The sound pressure and vibration values given in these instructions have been measured in accordance
with a standardized test and may be used to compare one fastening tool with another. They may be used
for a preliminary assessment of exposure. The data given represents the main applications of the fastening
tool. However, if the fastening tool is used for different applications, with different accessories or is poorly
8 English
Printed: 07.05.2018 | Doc-Nr: PUB / 5426517 / 000 / 00
Meaning
• The level is between 100 % and 75 %.
• The level is between 75 % and 50 %.
• The level is between 50 % and 25 %.
• The level is between 25 % and 10 %.
• Level is below 10 %. Replacement of the gas
can is recommended.
• The gas can is empty or is malfunctioning.
Replacement of the gas can is recommended.
Even when the level is indicated as "empty", the
gas can, for technical reasons, still contains a little
gas.
• No gas can or the wrong type of gas can is
present in the fastening tool.
Meaning
• Charge status is 75 % to 100 %.
• Charge status is 50 % to 75 %.
• Charge status is 25 % to 50 %.
• Charge status is 10 % to 25 %.
• Charge status is below 10 %.
• The fastening tool is overloaded or overheated
and thus not ready for operation.
3.3 kg
3.4 kg
500 mm
550 mm
−10 ℃ ...45 ℃
150 mm
200 mm
• 60 mm
• 90 mm
20 mm
800
−7.6 dBµA/m
13,553 MHz ...13,567 MHz