Control Techniques Commander SE SE11200025 User Manual page 4

General Information
The manufacturer accepts no liability for any consequences resulting from inappro-
priate, negligent or incorrect installation or adjustment of the optional operating pa-
rameters of the equipment or from mismatching the variable speed drive (Drive) with
the motor.
The contents of this User Guide are believed to be correct at the time of printing. In
the interests of a commitment to a policy of continuous development and improve-
ment, the manufacturer reserves the right to change the specification of the product
or its performance, or the contents of the User Guide, without notice.
All rights reserved. No parts of this User Guide may be reproduced or transmitted
in any form or by any means, electrical or mechanical including photocopying, re-
cording or by an information storage or retrieval system, without permission in writ-
ing from the publisher.
Drive software version
This product is supplied with the latest version of user-interface and machine control
software. If this product is to be used in a new or existing system with other Com-
mander SE Drives, there may be some differences between their software and the
software in this product. These differences may cause this product to function dif-
ferently. This may also apply to Drives returned from a Control Techniques Service
Centre.
If there is any doubt, contact a Control Techniques Drive Centre.
Copyright © December 2001 Control Techniques Drives Limited
Issue Code: 8
Software: V02.00.00 onwards