Advertisement
Quick Links
Know Your BABY ELFIE
AGE 14+
With 2.4G frequency band for long remote control
distance, BABY ELFIE allows multiple flights at the
same time without any interference. User can fly it
with gravity sensing remote control, or control it to
fly, roll, hover and take photos/videos with APP and
WIFI connection on smart phone.
3
9
8
11
12
10
1
5
2
4
7
6
1
Upper casing
7
Circuit board
2
Lower casing
8
Motor
3
Propeller
9
Gear
BABY ELFIE
Up cover of arms
Flashing lights
4
10
5
Down cover of arms(A)
11
Lampshade
MINI FOLDABLE DRONE WITH
DUAL REMOTE CONTROL MODE
12
6
Down cover of arms(B)
Camera
*Please read this manual carefully before operation and keep it
properly for future reference.
1
Operating Precautions For Gravity
FLY WITH REMOTE CONTROL
!
Sensing Remote Control
1.One-Key Start
①Hold the controller in horizontal position without
Before flying, hold the controller in horizontal
any tilt before starting your flight.
position.
①Press "Calibration" button for routine calibration.
②Press "One-key Start" button, push the joystick
forward lightly to fly the drone.
180°
②
②Keep the drone at least 3 meters away from you
for the first time you try gravity sensing controller.
Joystick (one
press to start/
Calibration
press again to
(long press
land)
for 2 seconds)
①
2.Joystick
③When you hold the controller upwards and it
Use the joystick to control the flight altitude and
faces to you right ahead, the drone will fly
left /right turn.
backward towards your position. Please operate
it carefully in this state to avoid being hit by
Ascend
drone and/or other accidents.
Descend
④In case of emergency, press "Stop" button
immediately.
Turn Left
Turn Right
Emergency
stop
10
11
Hover
4.Take Selfies
In the Altitude Hold mode, you can control the
When you release the left joystick (throttle) after
the ascent/descent action, the drone will hover at a
drone to turn the camera back to itself, then click
the camera button on the screen to take selfies.
certain height.
2
1
5.Gravity Sensor Control
Gravity Sensor Control: Click to enter Gravity
Sensor Control, put your right hand thumb on the
right joystick, and move the phone towards any
direction for remote control.
1
2
20
21
Accessories
PRE-FLIGHT PREPARATIONS
1.Flight Environment
BABY ELFIE x1
Backup propellers x4
（Battery included）
Indoor: Spacious spaces away from barriers,
crowds or pets are preferred.
Remote control x1
USB charger x1
Outdoor: Sunny, windless and breezy weathers
are preferred.
AGE 14+
BABY ELFIE
MINI FOLDABLE DRONE WITH
DUAL REMOTE CONTROL MODE
*Please read this manual carefully before operation and keep it
properly for future reference.
User manual x1
Protective bag x1
Please keep the drone in sight during the flight
and keep it away from barriers, high-tension
cables,trees and people.
Notes:
Please check the number of accessories carefully
(as shown above).Please provide proof of
purchase and contact the store for replacement if
Do not fly in extreme environment, such as
any missing parts.
hotness, coldness, strong wind or heavy rain.
2
3
3.Gravity Sensing Control
Tilt the controller to control the drone flying forward/
backward or left/right sideward.
Left
Sideward
Forward
Right
Sideward
Backward
12
13
6.Fine-Tunning
7.One-Key Reset
If the drone rotates or yaws, click the fine-tunning to
When deviating from course due to crash, please
the reverse direction of yawing till the yaw is
control the drone back to a horizontal plane and
adjusted and the drone stays oriented at the control.
click "One-key reset" for gyro calibration and
take-off again.
Left Rotation
Right Rotation
1
Fine-tuning
Fine-tuning
2
2
Forward
Fine-tuning
3
3
1
1
Backward
2
Fine-tuning
Notes:
Attention: When the drone is within 30cm from
the ground, it will be affected by the blade vortex
made by itself and become unstable. This is
"ground effect".The lighter the drone is,the
greater the effect will be.
3
Left Side Fly
Right Side Fly
Fine-tuning
Fine-tuning
22
23
2.Unfold Crankshafts
4.Battery Installation of Drone
Unfolding Sequence:
①Unfold the rear crankshafts.
②Unfold the front crankshafts.(Near the camera)
2
Fold the crankshafts in reverse order.
1
Camera
A.Press both ends of battery at the bottom of
the drone.
2
2
1
1
3. Propellers Installation
.
B
Unplug the power connector to remove the
battery.
A
B
B
A
Front
Release screws with
screwdriver counter-
A corresponds to A
clockwise and pull out the
propellers, install the
C.Connect USB charging cable with the
B corresponds to B
propellers correspondingly
charging interface of the lithium battery.
and screw on clockwise.
Notes:
Notes:
When installing or dismantling the propeller,please
LED lights on when charging, LED lights off when
do not exert force on the propeller to avoid distortion.
finish charging. Charging time is about 60 minutes.
4
5
4.Hover
KNOW YOUR REMOTE CONTROL
APP
When you release the left joystick (throttle) after the
ascent/descent action, the drone will hover at a
1.Wifi Connection
certain height.
①Use your phone to scan the QR code, download
and install the control software: 'JJRC'. Android,
Android(Google Play) and iOS are all supported.
Android
Android
（Google Play）
iOS
JJRC
②Turn on the drone and the lights will flash;turn on
your mobile phone to connect WIFI (JJRC-
#####), as shown in figure.
Setting
Wi-Fi
JJRC-#####
14
15
8.Flight Planning
FAQ
When the drone takes off, click "flight planning"
button to activate flight path mode. Draw a path in
the blank, and the drone would perform the flight
PROBLEMS
CAUSES
SOLUTIONS
path at the altitude as you pilot and fly on its own.
Not connect with
Connect the
the quadcopter
quadcopter battery
battery.
in right way.
Control
Do not fly in windy
failure
days. The
performance and the
Too strong wind
control of the
force.
quadcopter will be
affected by the
strong winds.
The rotation
Push up the throttle
speed of main
joystick.
blades is too slow.
Fail to
ascend
The battery of the
Please full charge
quadrocopter is
the quadcopter.
not fully charged.
9.Beauty Mode
The built-in beauty mode on camera can
Pull down the
automatically beautify images to deliver improved
Landing
The throttle stick is
throttle stick
and stunning images with outstanding
too soon
pulled down too fast.
slowly to perform
qualities.
a smooth landing.
Ensure that the
Out of
Beyond the effective
flying distance is
control
controlling distance.
within 30 meters.
Before
After
25
24
Battery Instructions
KNOW THE REMOTE CONTROL
!
There is a certain risk when using lithium
Different from ordinary remote control, this is a
battery. It may cause fire, body injury or
gravity sensing controller, which enables you to
property loss. Users must be aware of the
hold it in one hand and tilt it for drone direction
risks and take full responsibility of using
control. For novice user who tries gravity controller
battery improperly.
for the first time, please read the user manual and
If battery leakage occurs, please avoid
operate it carefully.
contacting your eyes and skin with
electrolyte. Once it happens, please wash
1
your eyes with clean water and seek medical
care immediately.
Please remove the plug immediately if you
2
sense any peculiar smell, noise or smog.
7
3
Battery Charging
Please use the charger from original factory
4
6
to ensure your safe usage.
Do not charge dilatant or outworn battery.
5
Do not over charge battery. Please unplug
the charger once fully charged.
Do not charge the battery next to
inflammables, such as carpet, timber floor or
wood furniture or on the surface of
electro-conductive objects. Please always
keep an eye on the battery when charging.
Do not charge battery which not cool down
4
Calibration
1
High/Low speed
yet.
(long press for
2
Joystick
The charging temperature should be
(one press to start/
2 seconds)
between 0℃to 40℃.
press again to land)
5
Emergency stop
3
Headless mode
6 Light control
Battery Recycling
Do not dispose the battery as daily rubbish.
7
Power switch
Please familiarize yourself with the local
garbage disposal method and dispose it
according to the special requirement.
6
7
2.APP Interface Instruction
FLY WITH APP
1.Remote Control Frequency Pairing
Click ①"ON", then click ② "Altitude Hold" for remote
control frequency pairing.
2
1
Return
Photo
Document
Video
（album/video）
Speed Control:
Altitude Hold
30%/60%/100%
Gravity Sensor
Show/Hide
Control
Steering Wheel
2.One-Key Start
More Settings
360°Flips&Rolls
Click "One-key Start" to activate the motor and
One-key
One-key Start
propellers.
Landing
Camera Reverse
3D Display
Headless Mode
One-key Reset
Emergency Stop
Flight Planning
Left Joystick （throttle）
Right Joystick（rudder）
Left/Right Rotation
Forward/
Fine-tuning
Backward
Fine-tuning
Left/Right Side Fly
Fine-tuning
16
17
JJRC TECHNICAL SUPPORT
Dear Customer,
Thank you for choosing JJRC product. Please
visit JJRC official website for more FAQ and
information if there is any problem of using our
product.
-Product Operation: Please visit JJRC College
for tutorial video or user manual.
-Product Features: Please refer to product page
description or product brochure.
-After-sale Service: Please refer to conditions
and terms of after-sale service.
The final interpretation right belongs to all JJRC.
Should you have any further questions, please
visit JJRC Online Feedback and leave your
message.
Thank you again for your support!
JIANJIAN TECHNOLOGY CO.,LTD.
www.jjrc-tech.com
26
1.Battery Installation of Controller
2.Pairing Remote Control With Drone
①Opening Battery Cover
①Turn on the power of the drone; put the drone on
plain ground; check whether the indicator lights of
The battery box is located at the controller bottom,
remote control and LED lights of drone flash.
open the battery cover by sliding upper cover
forward and lower cover backward hard.
①
②
Push the joystick （throttle ）to the top and
then pull back to the bottom. After the sounds of
Di-Di, the flash of indicator lights of remote control
and LED lights of drone will turn to constant lights,
which means the pairing completes.
②Loading Batteries
②
AAA batteries*2
+
3.Calibration of Remote Control
Calibrate the drone when it cannot vertically
ascend. Press "Calibration"button and the
indicator light of drone starts flashing. Then
release all the buttons till the flash of the drone's
indicator light turns to constant light. Thus the
calibration completes.Ensure the whole process
Open the cover of battery compartment, insert two
of calibration is operated under horizontal and
AAA batteries (not included)
steady circumstances.
Notes：
1. Ensure the polarity symbols on the batteries
match the symbols inside the battery
compartment.
2. Do not mix new and old batteries.
3. Do not mix different types of batteries.
8
9
3.Basic Flight
Right Joystick
Use the left joystick to control the flight altitude and
turn left/right, and the right joystick to control the
forward, backward, left and right side flight
directions.
Forward
Left Joystick
Ascent
Backward
Descent
Left Side
Flight
Turn Right
Right Side
Flight
Turn Left
18
19
Advertisement
