Qui c k Reference
LP-1000N
Label Printing Scale
Quick Guide for Frequent Questions
Programming the Date
• Press
on the numeric keypad.
• Press
on the alpha/numeric keypad.
The display will show PLU.
• Press
until the display shows SEt.
• Press
. The display will show SEt EntEr 0.
PRT/
*
• Press
on the numeric keypad and then press
Programming the Time
• Press
on the numeric keypad
• Press
on the alpha/numeric keypad
The display will show PLU.
• Press
until the display shows SEt.
• Press
. The display will show SEt EntEr 0
PRT/
*
• Press
on the numeric keypad and then press
Programming the Department Number
• Press
on the numeric keypad
• Press
on the alpha/numeric keypad
• The display will show PLU. Press
display shows SEt.
• Press
. The display will show SEt EntEr 0
PRT/
*
• Press
on the numeric keypad and then press
• Date
• Time
• Department Number
• Temporary Price Change
PRT/
*
PRT/
*
until the
PRT/
*
• Store Name
• Head Data
• Speed Keys
The display will show dAtE EntEr and the currently
programmed date. Enter the date
Once the date is entered, the display automatically goes
back to Set.
• Press
to go back to the weigh mode.
C
• Enter the time (format: HHMMSS). The time must
be entered in the military time format (1:00 PM =
1300, 2:00 PM = 1400, etc). The display will
automatically go back to Set.
• Press
to go back to the weigh mode.
C
• Enter the new department number and press the
The display will go back to Set.
• Press
to go back to the weigh mode.
C
NOTE: The change will not take effect until the scale
is turned off and turned back on.
.
format: DDMMYY
(
)
.
PRT/
*
20090501
Need help?
Do you have a question about the LP-1000N and is the answer not in the manual?
Questions and answers