Table of Contents
Advertisement
Quick Links
Quick Start Guide
XStream-PKG-E™ Ethernet RF Modem
Introduction
Com Port Communications
Range Test
Optional Configurations
Create a long range wireless link in minutes!
www.digi.com
© 2013 Digi International, Inc. All rights reserved.
Introduction
This Quick Start Guide provides OEMs and integrators with an introduction to some of
the RF modem's most important features. This guide provides step-by-step
instruction on how to setup a wireless link and test the modem's ability to transport
data over varying ranges and conditions.
Requirements for Range Test
1 PKG-E (Ethernet) RF Modem
1 PKG-R (RS-232) RF Modem
1 Windows PC loaded with the following software:
X-CTU
Com Port Redirector
Accessories (Loopback adapter, CAT5 cable, 2 RPSMA antennas, 2 power supplies)
Software Installation #1: X-CTU
Go to the X-CTU Software page at www.digi.com/xctu and launch the X-CTU
version 5.1.0.0 installer. This version is required for the XStream Ethernet
modem. Follow the prompts on the installation screens.
The X-CTU software interface is divided into the four following tabs:
• PC Settings - Setup PC com ports to interface with the RF modem
• Range Test - Test RF modem's range under varying conditions
• Terminal - Read/Set RF modem parameters and monitor data communications
• Modem Configuration - Read/Set RF modem parameters
Software Installation #2: Device Installer and Com Port Redirector
Go to the Knowledge Base page at www.digi.com/support/kbase. In the 'Keyword'
box type '2033' and press 'Search'. Click the link to the Knowledge Base article for
detailed instructions on how to install the Device Installer and Com Port Redirector.
90001381_A
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Digi XStream-PKG-E
Summary of Contents for Digi XStream-PKG-E
-
Page 1: Quick Start Guide
Accessories (Loopback adapter, CAT5 cable, 2 RPSMA antennas, 2 power supplies) Software Installation #1: X-CTU Go to the X-CTU Software page at www.digi.com/xctu and launch the X-CTU version 5.1.0.0 installer. This version is required for the XStream Ethernet modem. Follow the prompts on the installation screens. - Page 2 Range Test Once the Ethernet RF Modem has been setup for com port communications, a wireless link between devices can be created for the transportation of data. Hardware Setup Using the components listed on page one of this quick start guide, assemble the hardware needed for the range test.
- Page 3 Optional Configurations Out-of-box, the XStream-PKG-E Ethernet RF Modems comes configured to provide immediate wireless links between devices. The default configuration of the modem supports a wide range of RF communications. If the modem must support additional functions, modem parameters can be customized using standard AT and binary commands.
Need help?
Do you have a question about the XStream-PKG-E and is the answer not in the manual?
Questions and answers