Table of Contents
Advertisement
10.1 DSL Command List
Command ID 0x05: Set temporary DSL settings
Arguments:
0 – DSL Mode
1 – DSL Bitrate
2 – DSL PAM
3 – DSL Ratemode
Example: The example shows the command for setting DSL1 as STU-C, 192kbps, 4 TC-PAM, extended mode
Write Reg[44128] = 0x02
Write Reg[44129] = 0x05
Write Reg[44131] = 0x01
Write Reg[44132] = 0xC0
Write Reg[44133] = 0x04
Write Reg[44134] = 0x02
Write Reg[44130] = 0x01
Read Reg[44130] = 0x00
Focal Technologies Corporation
A Moog Inc. Company
(0x00 – STU-R (CPE), 0x01 – STU-C (CO))
(Bitrate in kbps)
(TC-PAM)
(0x00 – g.shdsl, 0x01 – g.shdsl.bis, 0x02 – extended)
//Select DSL1
//Set command ID 0x05
//Select STU-C
//Select bitrate 192kbps
//Select PAM 4
//Select Ratemode extended
//Trigger write
//Command Succeeded
Model 922-DSLH – User Manual
Page 10-7
Document No. 922-0677-00, Rev 1.0
Advertisement
Table of Contents
