Focal 922-DSLH User Manual page 36

Command
set ip [addr] Sets a new IP address. This
action is protected by IP
validation. For more information
see section 9.10.
set subnet Sets a new subnet mask. This
[netmask], action is protected by Subnet
[ip addr] validation. For more information
see section 9.10.
set gateway Sets the gateway.
[addr]
set dns1/dns2
Sets the primary (dns1) or
[addr]
secondary (dns2) DNS.
set hint [intvl] Sets the UDP heartbeat interval.
Valid inputs are 1-254 secs. For
more information see section 0.
Focal Technologies Corporation
A Moog Inc. Company
Description
Model 922-DSLH – User Manual
Example
Input: set ip 192.168.0.100
Telnet Output:
Model922_DSL> set ip 192.168.0.100
--> Updating IP Address... success
--> send 'reset' cmd to activate new settings...
Input: set subnet 255.255.255.0,192.168.0.100
Telnet Output:
Model922_DSL> set subnet 255.255.255.0,192.168.0.100
success IP Addres and Subnet Mask Updated
--> send 'reset' cmd to activate new settings...
Input: set gateway 192.168.0.1
Telnet Output:
Model922_DSL> set gateway 192.168.0.1
--> Updating Gateway... success
--> send 'reset' cmd to activate new settings...
Input: set dns1 8.8.8.8
Telnet Output:
Model922_DSL> set dns1 8.8.8.8
--> Updating Primary DNS... success
--> send 'reset' cmd to activate new settings...
Input: set hint 30
Telnet Output:
Model922_DSL> set hint 30
--> UDP Heartbeat Interval... success
--> UDP Heartbeat Interval set to 30 (sec)...
Document No. 922-0677-00, Rev 1.0
Page 8-3