Table of Contents
Advertisement
f.
Interface: RS-232, RS-422 or RS-485
g. 120Ω Termination*: Enabled or Disabled (*=not available in RS-232)
5. If required, change the static IP address and netmask.
6. Save configuration.
7. Repeat steps 3-6 for serial channel 2.
8. Trigger a software reset of each channel for the changes to take effect. This can also be achieved by power
cycling the card.
9. Done!
Focal Technologies Corporation
A Moog Inc. Company
Model 922-DSLH – User Manual
Document No. 922-0677-00, Rev 1.0
Page 3-7
Advertisement
Table of Contents
