Z2 Setup - B&K AVR101 Series Owner's Manual

Z2 Setup

Z2 Level Control - You may wish to install an in-wall volume control in your second zone. This can cause
confusion between your receiver's internal zone 2 volume controls and your in-wall controls.
WARNING - Setting Z2 LEVEL CONTROL to FIXED will cause your receiver to immediately send its
maximum zone 2 volume to your second zone (if zone 2 is on). Turn down your in-wall volume controls
before making this change.
ADVANCED SYSTEM SETUP
1 Zone 1 Setup
2 Zone 2 Setup
3 Power On Titles
4 Control Out
5 Security Options
SEL
M E N U
From Remote
­ V
1
(PAUSE) or (STOP)
2 SEL or ENTER
­ V
3
(PAUSE) or (STOP)
4
(REW) or (FF)
Z2 Max (Fixed or Variable) Level - Z2 max level allows you to set a maximum volume level for zone 2. This is
very useful if you are using speakers that can't handle the maximum power output from your external amplifier or if
you simply wish to limit the volume that can be achieved using normal front panel or remote operation. If you have
chosen zone 2 level control (fixed), then this setting becomes the fixed level for zone 2. If you have chosen zone 2
level control (variable) then this setting allows the level for zone 2 to be adjusted. However, when adjusting this
level it cannot exceed the value set in Z2 max level.
WARNING - If you set this level too low, the receiver may appear broken (no sound).
ADVANCED ZONE 2 SETTINGS
1 Z2 Level Control
2 Z2 Max Level
3 Z2 Product ID
4 V2 Output
WARNING Connecting a tape
recorder to V2 in LINE mode
can cause speaker damage
From Remote
­ V
1
(PAUSE) or (STOP)
2
(REW) or (FF)
move to new line
select menu page
previous page
From Front Panel
(UP) or
(ENTER)
(UP) or
VOLUME KNOB
Variable
+15 dB
2
Tape
move to new line
adjust parameter
previous page
M E N U
From Front Panel
(UP) or
VOLUME KNOB
ADVANCED ZONE 2 SETTINGS
1 Z2 Level Control
2 Z2 Fixed Level
3 Z2 Product ID
4 V2 Output
WARNING Connecting a tape
recorder to V2 in LINE mode
can cause speaker damage
M E N U
Action
move to Zone 2 Setup
(DOWN)
activate ADVANCED ZONE 2 SETTINGS
move to Z2 Level Control
(DOWN)
select Zone 2 Fixed or Variable
ADVANCED ZONE 2 SETTINGS
1 Z2 Level Control
2 Z2 Fixed Level
3 Z2 Product ID
4 V2 Output
WARNING Connecting a tape
or
recorder to V2 in LINE mode
can cause speaker damage
move to new line
adjust parameter
previous page
M E N U
Action
move to Z2 Max or Fixed Level
(DOWN)
set to desired level
44
Fixed
+15 dB
2
Tape
move to new line
adjust parameter
previous page
Fixed
+15 dB
2
Tape
p/n 12699 Rev. 9812C