Edit Preset Options - B&K AVR101 Series Owner's Manual

Edit Preset Options

This menu allows you to configure your EDIT PRESET menu (see OPERATION - PRESETS) to allow changing
only the preset title (as you are used to if you have used older B&K equipment) or a more versatile mode that
allows for directly editing common preset information from the EDIT PRESET menu. Check that you are in USER
PREFERENCE SETUP and that the remote is in AUDIO mode.
USER PREFERENCE SETUP
1 Edit Preset Options
2 Edit Source Name
3 Display Setup
4 Surround Modes
5 Memory Options
SEL
M E N U
From Remote
­ V
1
(PAUSE) or (STOP)
2 SEL or ENTER
3
(REW) or (FF)
4 MENU
Edit Source Name
From the factory, your receiver will display source names that match those printed on the rear of the receiver and
on the supplied remote. However, this menu allows you to change the displayed names to match the actual
sources used. If you do not want to change the names then skip this step. Note that the tuner name cannot be
changed. Check that you are in USER PREFERENCE SETUP and that the remote is in AUDIO mode.
USER PREFERENCE SETUP
1 Edit Preset Options
2 Edit Source Name
3 Display Setup
4 Surround Modes
5 Memory Options
move to new line
select menu page
previous page
From Front Panel
(UP) or
(ENTER)
VOLUME KNOB
MENU
move to new line
SEL select menu page
M E N U previous page
EDIT PRESET OPTIONS
Full Edit Preset
Changes allowed only
to the PRESET TITLES
M E N U
Action
move to Edit Preset Options
(DOWN)
activate EDIT PRESET OPTIONS
choose option
return to USER PREFERENCE SETUP
EDIT SOURCE NAME
DEFAULT
V1
Using AV system controller
select source to rename
AUD
M E N U
21
No
adjust parameter
previous page
USER
VC R
to select control
change character
change position
previous page
p/n 12699 Rev. 9812C