Getting Receiver Status - B&K AVR101 Series Owner's Manual

From Remote
1 MENU
­ V
2
(PAUSE) or (STOP)
3 SEL or ENTER
4 number or A + number
­ V
5
(PAUSE) or (STOP)
(REW) or (FF)
6 source then AUDIO
MODE
VOL or VOL
CENTER or CENTER
REAR or REAR
SUB or SUB
DELAY or DELAY
7 SEL or ENTER
8 repeat 4 - 7
9 MENU
10 MENU
Note: If you have selected TUNER you can change channel or frequency as described in TUNER OPERATION.

GETTING RECEIVER STATUS

If you are not in a menu, pressing ENTER will bring up a two-line status message. This display will also pop up
automatically whenever you change sources or whenever the source information changes. The video type is very
important if you are using mixed composite and S-video sources since it will tell you how you must set your
monitor for the best picture. The bitstream and channel information is particularly important with DVDs since they
may contain multiple soundtracks. When you initially start the DVD you may get a Dolby Digital 2.0 soundtrack. To
get the best possible sound, you may have to use the DVD player's menu system to get to a Dolby Digital or DTS
5.1 channel soundtrack. If you ever need to call B&K regarding a problem with your receiver be sure to note the
status display before calling.
The audio/video source
The bitstream source
your receiver has detected
From Remote
SEL or ENTER
From Front Panel
MENU
(UP) or (DOWN)
(ENTER)
(PRESET) step to desired preset
(UP) or (DOWN)
VOLUME KNOB
P P
(SOURCE)
(MODE)
(ENTER)
repeat 4 - 7
MENU
MENU
you have chosen
DVD Source Composite Video
DVD PCM 2.0
The bitstream type
your receiver has detected
From Front Panel
(ENTER)
Action
activate menu system
move to Edit Preset (Titles)
activate EDIT PRESET (TITLE)
recall preset
rename preset if desired
edit preset if desired
(full preset edit must be enabled -
see USER PREFERENCE SETUP)
save preset if desired
edit more presets
return to main menu
exit menu system
The surround mode
you have chosen
Pro Logic
The video type
your receiver has detected
The number of channels
your receiver has detected
Action
recall receiver status
39
p/n 12699 Rev. 9812C