Driving Data Display (Multifunction Display) - Seat ATECA Instruction Manual

›››
■ Telephone Booklet Infotainment System
›››
Vehicle status page 6
■
Lap timer*
■
Service Menu
Various adjustments can be performed in the
Service menu depending on the equipment.
Open the Service menu
To open the Service menu, select the Oper-
ating range information profile (Infotain-
ment button > function button View >

Driving data > Operating range
and hold down the multifunction steering
wheel button for approx. 4 seconds. Now

you can navigate the menu with the multi-
function steering wheel buttons in the usual
way.
Restart the service interval display
Select the Service menu and follow the in-
structions given on the instrument panel dis-
play.
Restart the oil service
Select the Restore Oil Service menu
and follow the instructions given on the in-
strument panel display.
Instruments and control lamps
Restart driving data
Select the Reset Trip recorder menu
and follow the instructions given on the in-
strument panel display.
Distinctive letters for engine (DLE)
Select the Distinctive letters for
engine menu. The distinctive letters for en-
gine will be displayed on the instrument pan-
el display.
Set time
Select the Time menu and set the correct
time by turning the right thumbwheel of the
)
multifunction steering wheel.
Driving data display (multifunction
display)
The driving data display (multifunction dis-
play) shows different driving data and con-
sumption values.
Switch displays
● Turn the right thumbwheel of the multifunc-
›››
tion steering wheel page
Change the memory
Press the button on the multifunction

steering wheel.
Since start
The memory will be deleted if the journey is
interrupted for more than 2 hours.
Since refuelling
Display and memory of the driving data and
consumption values collected. When refuel-
ling, the memory is erased.
Total calculation
This memory collects driving data up to a
maximum of 19 hours and 59 minutes or 99
hours and 59 minutes, or up to a maximum
of 1,999.9 km or 9,999.9 km. When one of
these maximum values is exceeded (it varies
depending on the version of the instrument
panel), the memory is erased.
Erase drving data memories
● Select the memory that you wish to erase.
Press the
●
steering wheel for approx. 2 seconds.
Select the displays
The driving data to be displayed may be ad-
justed in the Infotainment System, in the ve-
8.
hicle's settings menu.
Average consumption
The average fuel consumption is displayed
after approx. 300 meters.
memory
memory
memory
button of the multifunction

display
»
5