Operating Range - Seat ATECA Instruction Manual

display

Operating range

Approximate distance in km that can still be
travelled if the same driving style is main-
tained.
Display AdBlue Operating range or Op-
1)
erating range

Approximate distance in km that can still be
travelled with the current AdBlue
if the same driving style is maintained. The
display is shown from an operating range of
less than 2,400 km and cannot be deactiva-
ted.
Average speed display
The average speed is displayed after approx.
100 metres.
Convenience consumers
A list of the connected convenience systems
that increase energy consumption is dis-
played, e.g. the air conditioning.
Set a speed warning
● Select the display Speed warning at
or Speed warning at
--- km/h
--- mph .
1) Not available in all countries.
6
Operating range
● Press the

steering wheel to save the current speed and
activate the warning.
● Set the desired speed after approx. 5 sec-
onds by turning the right thumbwheel of the
multifunction steering wheel. Next, press the
button or wait several seconds. The speed

is stored and the warning activated.
To disable the warning, press the
●
® tank level
again. The saved speed is deleted.
The warning may be adjusted for speeds be-
tween 30 km/h (18 mph) and 250 km/h
(155 mph).
Warning and information messages
The system runs a check on certain compo-
nents and functions when the ignition is
switched on and while the vehicle is moving.
Faults are displayed on the instrument panel
display in the form of red and yellow warning
symbols accompanied by messages and, de-
pending on the case, even an acoustic sig-
nal. The display of messages and symbols
may vary depending on the version of the in-
strument panel.
Existing faults can also be checked manually.
This requires opening the menu Vehicle
status or Vehicle
display
button of the multifunction
button

›››
page 4.
Priority 1 warning (in red) The symbol flash-
es or lights up (partly accompanied by
acoustic warning signals).
ry on driving! Danger! Check the fault
and eliminate the cause. In this case,
you should seek professional assis-
tance.
Priority 2 warning (in yellow). The symbol
flashes or lights up (partly accompanied
by acoustic warning signals). Malfunc-
tions or lack of operating liquids can
cause damage to the vehicle and its fail-
ure. Check the function that fails as
soon as possible. In this case, you
should seek professional assistance.
Informative message. Provides information
about processes in the vehicle.
Note
● Depending on the equipment, some set-
tings and instructions can also be adjus-
ted/made or displayed in the Infotainment
System.
If there are several warnings, the corre-
●
sponding symbols will light up successively
for a few seconds. The symbols will remain lit
until the cause is eliminated.
● If, when the ignition is switched on, warn-
ings about existing faults are displayed, it is
Do not car-
