Leica ScanStation P30 Manual page 83

ScanStation P40/P30, Scanning
Available commands:
Command Function
Set Accept the setup results for this station and proceed to
Scan Parameters screen.
Add Switch to Define Resection Targets and define additional
targets for resection.

View View point cloud of selected target scan.
Use Change the target status in the Use field from Yes to No.
Page Switch to the Plot page.
Shift -> Re-Pick Open the video viewer to pick and scan the target again.
Shift -> Redo Repeat target scan to selected target and setup calculation.
When an orientation has already been computed then
the additional target can be aimed automatically and
no target picking is required.
83