Leica ScanStation P30 Manual page 187

ScanStation P40/P30, Traverse
Field Options
2-face Target Off
Scan
On
Position Limit On
Off
Height Limit On
Off
Description
Enable target scanning for traversing in one face
only.
Enable target scanning for traversing in two faces.
Enable checking of horizontal coordinate differ-
ence (hz range) between existing and measured
known backsight point.
If defined Position Limit is exceeded, the setup
can be repeated, skipped or stored.
Disable checking of horizontal coordinate differ-
ence (hz range) between existing and measured
known backsight point.
Enable checking of vertical difference between
existing and measured known backsight point. If
defined Height Limit is exceeded, the setup can
be repeated, skipped or stored.
Disable checking of vertical difference between
existing and measured known backsight point.
187