Henny Penny CombiMaster CM Operator's Manual page 7

General Instructions / For your Safety
Loading/removal
Open appliance door slowly.
When door is opened heating and fan shut down
automatically.
The fan wheel brake is activated. The fan keeps run-
ning for a brief period only.
Do not touch the fan wheel.
Do not insert pans or grids until the hinged rack has
been properly secured and the mobile oven rack has
been pushed up to the stop and locked in place.
Only use commercial-grade heatproof accessories.
Units with hinged rack (061/062/101/102)
To remove rack
Slightly raise rack unit and lift out of front catch.
Swing rack to middle of cooking cabinet.
Lift up and out of slots. To replace, set into slots and
reverse the procedure.
Mobile oven rack
Working with mobile oven racks, mobile plate
racks and transport carts for base-top units
(option)
- Remove hinged rack.
- Set guide rails on cabinet floor.
- Push mobile oven rack or plate rack into cabinet up
to the stop and lock into place.
- Transport carts must be properly attached to the unit
using the holder.
- Unlock mobile oven rack or plate rack and roll out.
- When transporting the mobile oven rack or plate
rack on the transport cart, make sure the transport
safety catch is engaged.
- Cover and secure containers with liquids to
avoid spills and the risk of scalding.
Warning!
• Pans must be locked with pan locks on the
mobile oven rack!
• Mobile oven racks, mobile plate racks,
transport carts and units on casters can tip
over when being moved over an inclined
plane or threshold.
- 6 -