System Settings - Block CVR-100+ MKII Manual

System settings

Press the „Menu" button on your remote control (page 10 / item 12) or on the device (page 10 / item 12) and
select the System settings item. In the following menu you carry out the following settings:
Internet settings:
In this menu, you can change the settings you have made for your Internet connection, e.g. when you change
the location. You can also restart the assistant wizard, or manually set up the connection. Read the pages 13-14
in the operating instructions.
Language:
Select your desired display language for the device.
Default settings:
Selecting and confirming this item resets all settings back to the factory settings. Please use this feature if mas-
sive problem occurs with the receipt of data from the Internet or the general operating software of the device.
You should also perform this function if you want to resell the device. After running the factory settings, a new
start requires a restart of the device wizard.
Software Update:
The CVR-100 + MKII checks regularly whether there is any update available on the Internet and points it out. You
can then choose to run the update. You can disable this feature (not recommended), or check the operating
software for update process.
Setup Wizard:
Selecting and confirming this item starts the setup wizard. All the settings you then make override the old set-
tings. You can also use the setup wizard to update the time settings (summer and winter time) if problems occur
during the automatic changeover.
Info:
Selecting and confirming this point will show you technical information about the installed software version,
the manufacturer ID of the device, and the name under which your device appears on the network.
28