Setting Up And Operating Multi-Room Systems - Block CVR-100+ MKII Manual

Setup up and operation of multi-room systems
To integrate your CVR-100 + MKII into a multi-room system, e.g. to the Smartbox SB-100 from Audioblock,
please read the supplied instructions for the App „UNDOK ™", which is mandatory for the configuration.
Please note that the multi-room functionality is only available from 01/2016 onwards!.
The optical connections
The rear optical connections of the CVR-100 + MKII (also S / PDIF® or TOSLINK®) process stereo light wave signals
in digital form (no Dolby® surround or similar). These connections are particularly suitable for external CD play-
ers, data recorders or many modern televisions. For most televisions, the optical audio output on the TV menu
must first be activated. For the connection, please consult the operating instruction of the external device. A
suitable cable is available in an accessory shop.
The coaxial connection
The rear coaxial connector of the CVR-100 + MKII processes electrical stereo audio signals (no Dolby® surround
or similar) in digital form. This connection is particularly suitable for external CD players, data recorders or sa-
tellite receivers. For the connection, please consult the operating instruction of the external device. A suitable
cable is available in an accessory shop.
The AUX connection
The rear AUX connector of the CVR-100 + MKII processes electrical high-level audio signals in analogue form.
This connector is suitable for all external devices with analogue audio output. For the connection, please con-
sult the operating instruction of the external device. A suitable cinch cable is available in an accessory shop.
The TV and DVD connection
The rear TV and DVD connections of the CVR-100 + MKII process electrical high-level audio signals in analogue
form. These connections are suitable for all external devices with analogue audio output, for example, for the
connection of a TV, DVD player or satellite receiver with analogue audio output (e.g. over the headphone output
of the TV). For the connection, please consult the operating instruction of the external device.. A suitable cinch
cable is available in the accessory shop.
The phono connection
The rear phono connector of the CVR-100 + MKII processes electrical high-level audio signals in analogue form.
This connection is suitable for record players with MM system (common), but not for MC systems (rare). For the
connection, please consult the operating instruction of the external device. To prevent a hum, please connect
an existing earth cable to the record player and the CVR-100 + MKII. A suitable disc player cinch cable with groun-
ding is available in the accessory shop.
26