Table of Contents
Advertisement
The pre-out output
The rear pre-out output sends high-level electrical audio signals in analogue form. These signals will not change
in sound and volume after the settings made on the CVR-100 + MKII. This output is particularly suitable for an
additional amplifier, e.g., an active subwoofer in a second room, or radio loudspeakers, e.g. for terrace or
kitchen.
The Rec-Out output
The rear rec-out output sends high-level electrical audio signals in analogue form. These signals will not change
in sound and volume after the settings on the CVR-100 + MKII, but transmitted unchanged from the respective
signal source. This output is particularly suitable for recording devices such as tape recorder or cassette recor-
der. The USB connection
The USB connection
See page 21 for a more detailed description of the USB front connector.
The line-in connector
The line-in connector located behind the magnetic cover at the front of the CVR-100 + MKII processes electrical
high-level audio signals in analogue form. This connector is suitable for all external devices with analogue audio
output, like media players, iPod®, smartphones etc. (connection over headphone output). For the connection,
please consult the operating instruction of the external device. A suitable 3.5 mm cable is available in the ac-
cessory shop
The headphone connection
The headphone jack of the CVR-100 + MKII, located behind the magnetic cover on the front, allows you to con-
nect a commercially available headphone with 6.3 mm jack plug. A 3.5 mm jack adapter for smaller headphones
can be obtained from the accessory shop.
The loudspeaker outputs
The CVR-100 + MKII is equipped at its back with two high-quality gold-plated terminal pairs for the connection
of loudspeaker cables. Cables can be connected either via banana plugs mounted on the cables (plug-in moun-
ting) or via the screwable terminal heads with the stripped loudspeaker cable (screw mounting).
27
Advertisement
Table of Contents
