Connecting External Devices Via Bluetooth - Block CVR-100+ MKII Manual

Adapting external Remote controls
Your CVR-100 + MKII can learn the codes from other remote controls, e.g. from a TV remote control. Proceed
as follows:
•
Press the „Menu" button on the appliance for 3 seconds, then the device enters the learning mode
•
„Press on Block FB button" will appear on the display. Press a button on the remote control to select a
function to transfer.
•
The following appears on the display: „Code from Block FB accepted" and shortly afterwards „Please
press external FB key". Now press the button on the extern remote control to release the function to be
transferred.
•
„Key code has been transmitted" appears on the display. Then it jumps back to fist point.
•
Repeat these steps until all functions (max. 50) have been transferred to your remote control unit. Exit
the programming by pressing again the „Menu" button on the device. If you have programmed a key
incorrectly, simply repeat all steps with the right keys, the device will overwrite the faulty settings.
•
To delete all programs, press and hold the keys „Back" and „Enter" (page 9, items 13 and 19) on the
device, and then restart the device completely.
Connect external devices via Bluetooth
Your device is equipped with a modern Bluetooth® interface. This allows you to pair any Bluetooth® source
with the CVR-100 + MKII. Possible sources are smartphones (iOS, Android, Windows Phone), Tablet PCs (iOS,
Android, Windows 8) or media players (iPod, similar) with Bluetooth® function. Connecting external devices
via Bluetooth® Your device is equipped with a modern Bluetooth® interface. Through this you can pair any
Bluetooth source with the CVR-100 + MKII. Possible sources with Bluetooth function are smartphones (iOS,
Android, Windows Phone), tablets (iOS, Android, Windows 8) or media players (iPod, similar). To activate the
Bluetooth® function, press the „Source" button until Bluetooth® appears on the display, then activate the
Bluetooth function on your external device. Pair an external device with the CVR-100 + MKII: On your external
device, search for Bluetooth devices in your surroundings, select your CVR-100 + MKII and begin the pairing
(coupling the devices) In case of problems, or if you need further information about the pairing, please
consult the instruction manual of the device you wish to pair with your CVR-100 + MKII. Afterwards you can ac-
tivate the music playback function of your external device and your CVR-100 + MKII will play the music. Please
note that you can only link sources using the built-in Bluetooth function. The pairing of, for example, external
speakers to the CVR-100 + MKII is not possible!
Playback of audio files:
1. Press „Play" on the remote control (page 10 / item 13) to play a track.
2. Press „Pause" on the remote control (page 10 / item 18) to pause a track.
3. Press „Forward" on the remote control (page 10 / item 20) to jump to the next track
4. Press „Back" (page 10 / item 21) to jump to the previous track..
®
25