Motic Moticam X Quick Start Manual

Quick Start Guide

This camera is a delicate instrument and should be handled with care. When not in use, please store the camera in a

safe place with the dust cap attached. Do not let the camera get in contact with water or expose it to extreme

temperatures (below 0 or above 50 degrees Celsius). In order to receive the highest level of service, please retain your

receipt as proof of purchase.

Included Parts

Moticam

Moticam X / X

Calibration Slide

C-Ring

Motic Images CD

USB Cable and

Charger

X / X

Eyepiece Adapter (2)

Dust Cap

Focusable Lens

Battery (X

only)

Macro Tube

Table of Contents

Do you have a question about the Moticam X and is the answer not in the manual?

Page 1 Do not let the camera get in contact with water or expose it to extreme temperatures (below 0 or above 50 degrees Celsius). In order to receive the highest level of service, please retain your receipt as proof of purchase. Included Parts Moticam X / X Eyepiece Adapter (2) Calibration Slide Dust Cap...
Page 2 Using the Camera On the eyepiece 1. Install the Motic Images Plus application program from the CD included. 2. Remove the Dust Cap from the camera and attach the focusable lens 3. Choose the right size eyepiece adapter and attach this to the focusable lens 4.
Page 3 1. Each Moticam X transmits its own WiFi signal to which you can directly connect your WiFi Device. 2. The Moticam X’s SSID signal is printed on a label on the camera. To log into your camera, simply connect your WiFi device to that signal.

Moticam x2