Westinghouse WHE6874 User Manual page 6

Door opening
Your refrigerator should be positioned to allow
easy access to a counter when removing food. For
best use of refrigerator drawers and freezer
baskets, the refrigerator should be in a position
where both can be fully opened.
CAUTION
LED lighting
Your appliance is fitted with long life LED lighting.
In the unlikely event the LED lights should fail, then
the LED lights should be serviced by the service
agent, to avoid a safety hazard. Refer to the
warranty page for contact details.
Cabinet Leveling & Refrigerator Door Alignment
(if necessary)
Guidelines for final positioning of your refrigerator:
• All four corners of the cabinet must rest firmly
on the floor.
• The front should be slightly elevated to ensure
that doors close and seal properly.
• Doors should align with each other and be level.
Most of these conditions can be met by raising or
lowering the adjustable front rollers.
To level the cabinet using the front rollers:
1. Slightly open freezer drawer if the toe grill is
installed. Lift the toe grille and gently pull
forward.
2. Make initial cabinet adjustments by using the
front roller height adjusting screws. Use a 3/8
inch socket wrench to turn the adjustment
screws (1 per side).
To raise: turn adjustment screw clockwise.
To lower: turn adjustment screw counter
clockwise.
3. Ensure both doors are bind-free with their seals
touching the cabinet on all four sides and that
cabinet is stable.
4. After unit is leveled, lower anti-tip leg using a
3/8 inch socket wrench until it firmly contacts
the floor.
6
To make final door height adjustments:
1. Open freezer drawer to make lower hinge
visible.
2. Insert 6mm Allen wrench into the shaft of the
lower hinge.
3. Adjust the height by turning clockwise or
counterclockwise.
lower the door. Turning counterclockwise will
raise the door. Default setting is to the lowest
height when you receive your appliance.
Turning clockwise will