Using The Software - Mantracourt FSU-SSBD User Manual

Using the Software

You can now launch the FSU Toolkit software.
Only one FSU module at a time can be connected to a PC!
The FSU Toolkit automatically detects the connected FSU module.
If the FSU module is detected when you launch the FSU Toolkit it will be automatically selected and the
Information page will be displayed.
If the module is not detected you will see the Home page at which you can wait until the FSU module is connected.
Pressing the Detect button will start the detection process.
The Review page is also available at this point. See later in the manual for using the Review page. This will allow you
to review previously saved data.
Recording occurs continuously in the background while on any of the following pages:
, 
   
Capture, Review Scope, FFT
and will continue even while navigating between these pages.
However, switching to any of the other pages
     
Home, Information, Save & Restore, Lock, Calibration
will cause the recording to stop.
Mantracourt Electronics Limited – FSU User Manual 6