Table of Contents
Advertisement
This feature is available by right-clicking on the chart and copies the chart image to the clipboard enabling pasting
into other applications.
Scope Page
Click on the
icon to open the Scope page.
This page offers a simple oscilloscope view of wave based input signal to help visualise what is happening.
From this page you have the ability to Clear the current recording or click Capture All to capture the entire recording
and display it in the Review page.
This page best allows viewing of frequencies of between 1 Hz and 500 Hz. You can view waveforms up to around 2
kHz but there will not be enough samples in the captured data to represent the proper waveform.
Auto Locate
Click this button to automatically select the best settings to view the current input waveform.
Trigger level
This selects the trigger level which is the value at which the left-hand side of the scope starts to draw the waveform.
Trigger
Turns the trigger on or off.
Edge Falling
Normally the trigger is set to detect a rising edge. Turn Edge Falling to On to detect the falling edge of the
waveform.
Copy Scope Image
This feature is available by right-clicking on the chart and copies the chart image to the clipboard enabling pasting
into other applications.
Mantracourt Electronics Limited – FSU User Manual
20
Advertisement
Table of Contents
