Steam Ironing - Rowenta Master DG 560 Instructions For Use Manual

Rowenta instructions for use steam iron dg 560, dg 580
Table of Contents

Advertisement

DG580 model: Press both on/off switches (A) and (B) so that
the iron light and steam indicator light turn on.
(B)

STEAM IRONING

Warning: Never iron or steam clothes while they are
DG 560
1. Set the iron's temperature control dial according to the
type of fabric being ironed.Check the fabric's label for
appropriate setting and steam recommendations.
Fabric
synthetics
e.g. viscose,
polyester
silk,
wool
cotton,
linen
2. Once the iron has heated to the proper temperature and
the boiler is ready, the temperature indicator light and
steam indicator light will go out. The iron is now ready for
use.
3. To obtain steam press the steam button beneath the iron
handle. When you release the button, steam will stop.
We recommend pressing and releasing the steam button
at regular intervals of 15 seconds.
With delicate fabrics ( setting), press the steam
button under that handle intermittently rather than
continuously. This will avoid water droplets from
appearing with the steam.
(A)
being worn.
Temperature
regulator
(low temperature)
(medium temperature)
(high temperature)
2. When the steam indicator light
turns off (approximately 7
minutes), steam is ready.
3. During ironing the temperature
indicator light for the iron and the
steam indicator light will turn on
and off. This is normal as the
temperature is being regulated.
The unit is still on when these
lights go out.
4. To turn the unit off, press the
switch(es) in the opposite
direction so that the side without
the light is depressed. Unplug
and leave to cool completely
before emptying or putting away.
Set the temperature control dial
on the iron to the minimum
setting before unplugging.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Master dg 580

Table of Contents