Rowenta Master DG 560 Instructions For Use Manual
Rowenta Master DG 560 Instructions For Use Manual

Rowenta Master DG 560 Instructions For Use Manual

Rowenta instructions for use steam iron dg 560, dg 580

Advertisement

Steam button
Iron rest
Connection
cord
Control
panel
DG 560
Steam
indicator
DG 580
On/Off
switch
iron (B)
Steam output
control dial
Rowenta Werke GmbH
63016 Offenbach am Main
Instructions for Use
Temperature control dial
Power cord
Master
Temperature
indicator light
Boiler unit / water tank
On/Off switch (A)
Steam indicator
On/Off switch
boiler (A)
Soleplate
Boiler
cap

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Master DG 560 and is the answer not in the manual?

Questions and answers

Summary of Contents for Rowenta Master DG 560

  • Page 1 Steam button Iron rest Connection cord Control panel DG 560 Steam indicator DG 580 On/Off switch iron (B) Steam output control dial Rowenta Werke GmbH 63016 Offenbach am Main Instructions for Use Temperature control dial Boiler unit / water tank...
  • Page 2: Important Safety Instructions

    11. Do not direct steam at people, animals or iron clothes while they are being worn. 12. The use of accessory attachments is not recommended by Rowenta and may result in fire, electric shock or personal injury. 13. Always put the iron with the soleplate down on the iron rest, never resting on its heel.
  • Page 3: Before Use

    Before using the generator for the first time or if you have not used the steam function for a few minutes, press the steam button several times in a row while holding the iron away from your clothes. This will enable any cold water to be removed from the steam connection cord.
  • Page 4: Steam Ironing

    2. Once the iron has heated to the proper temperature and the boiler is ready, the temperature indicator light and steam indicator light will go out. The iron is now ready for use. 3. To obtain steam press the steam button beneath the iron handle.
  • Page 5: Dry Ironing

    1. Fill iron according to the Filling the Boiler section of instructions. 2. DG 560 model: Press the on/off switch (A) on the control panel and the steam indicator light will turn on. Set the temperature control dial on the iron to the (...
  • Page 6: After Ironing

    In normal use a draggy coating may build up on the soleplate (starch, detergent buildup, burnt synthetic fibers). This can be easily removed by using the Rowenta Soleplate Cleaning Kit or a quality hot iron soleplate cleaner available at most stores.
  • Page 7 WATER RECOMMENDATIONS Tap water Rowenta irons are designed to be used with REGULAR TAP WATER (up to 12 grains of hardness). If your water is harder than this, Rowenta recommends mixing half tap water with half distilled water which reduces the hardness;...
  • Page 8: Troubleshooting

    Water runs Boiler is too full. through the holes in the soleplate. Thermostat isn't working. The iron was used before it had reached temperatures. Water has condensed in the steam tube as iron hasn't been used for some time. DG 580...
  • Page 10: Limited Warranty

    In the interest of improving products, Rowenta reserves the right to change specifications without prior notice. LIMITED WARRANTY All Rowenta products are warranted for 1 year from date of purchase against defects in material and workmanship. During this period, any Rowenta product that, upon inspection by Rowenta, is proved defective, will be repaired or replaced, at Rowenta’s option, without charge to the...

This manual is also suitable for:

Master dg 580

Table of Contents