Advertisement
• After peeling, we advise you to wipe over the area with
a moist flannel to remove any dead skin. Dry the skin tho-
roughly afterwards.
• Method :
- Press the release button to remove the epilator head.
- Clip the Exfoliator Head to the epilator.
- Set the switch to "1" .
- Start exfoliating with a slow, gentle up and down movement.
When using the Micro-Peeling function for the first time or if your skin is very deli-
cate, we recommend:
1. skin is wet before peeling, use cotton wool or a flannel to do this
2. making slow and gentle rotating movements when using the appliance
3. not to use the appliance more than twice on the same area.
• Replacing the exfoliating band
- Press the release button to remove the Exfoliator Head from the epilator.
- Using the plastic end of the cleaning brush unclip the band as follows:
1. Turn the Exfoliator Head over and hold it in place by grip-
ping the edges between your thumb and forefinger.
2. Turn the band so that its groove comes round to the central
position.
3. Insert the end of the cleaning brush in the groove and push
to eject the band.
4. Insert the new band by slotting the fins (b) of the exfoliator
unit in the groove of the band and pushing until it clicks!
a
b
GB
Advertisement
