Symptom
6.
Flow rate too low or
too high.
7.
Dripping from bath
or shower outlet.
8.
Temperature too hot
or too cold.
a.
(Too low) Insufficient supply pressures.
b.
(Too low) Refer to symptom 2.
c.
(Too high) Supply pressure too high.
d.
Flow regulators fitted incorrectly.
a.
Remove the flow divertor cartridge and check the
cartridge inlet seal. Replace if damaged.
b.
If leak persists replace the flow divertor cartridge.
a.
Refer to symptom 1.
b.
Refer to symptom 4.
19
Cause/Rectification