Table of Contents
Advertisement
6.
For low pressure systems only, make sure that you remove the three flow
regulators fitted to the hot and cold inlets and to the shower outlet. This will make
sure that the highest possible flow rate is achieved. Refer to section: 'Maintenance,
Flow regulator Removal'.
7.
For combination boilers only, make sure that the green flow regulator supplied
installed in the hot inlet is replaced with the white flow regulator (supplied). Refer
to section: 'Maintenance, Flow regulator Removal'.
8.
Check the installation for any leaks. Fully open the isolating valves fitted to the
supply pipework.
9.
Install the shower fittings, refer to the appropriate section in the Shower Fittings
Installation and User Guide.
10. Connect the shower hose to the shower outlet of the Excel BSM.
11. This completes the installation of the Mira Excel BSM.
Note! Following the installation of your Mira Excel BSM commissioning checks
must be carried out, refer to section: 'Commissioning'
14
Hide quick links:
Advertisement
Table of Contents
