Reset Button Functions For Sp2+ Units - AKCP SensorProbe2 PLUS Introduction Manual

Reset button functions for SP2+ units

There are specific commands you can send to the unit by holding the Reset button for a specified
amount of time.
You'll have to use something sharp, such as a straightened paperclip to be able to press Reset.
Commands:
Time to hold Action
3..7 sec Reboot
7..12 sec Web UI password reset
12..17 sec Serial flash erase (
17..25 sec Reset to factory defaults (serial flash erase + config erase)
DB erase without factory reset, the system configuration is kept
- 6 -
SP2+ Introduction Manual
)