Optical Measurement; Presentation Of The Optic Measurement - Triax MCT059 User Manual

19 Optical measurement

19.1

Presentation of the optic measurement

The Optic function allows measurements in various set-up configurations:
-cable satellite reception (cable LNB output)
-after a cable sat/terrestrial coupler
-measurement of optical power
Accessories are provided to use this function:
-1 angled F/F cable (code: 978754800)
-1 FC/FC optical fiber jumper cable to switch from APC to PC, SPC or UPC (code: 978754700)
-1 FC/SC APC optical fiber jumper cable (code: 978754710)
-1 connection SC/SC APC
-1 connection FC/FC
Plugging:
(Appliance seen from above)
To switch to optical mode:
From the start page:
FC APC optical input
with protective plug
RF F output of the opti-
cal option to connect to
the RF F input of the
appliance via the pro-
vided angled F/F cable
– MCT059 –
p.
75