Presentation; General - Triax MCT059 User Manual

– MCT059 –

3 Presentation

3.1

General

-The MCT059 field measurer is a handy appliance designed to qualify and maintain all RF or optical installa-
tions RF for broadcasting and receiving analogical and terrestrial digital, satellite or cable network television
channels.
-The band ranges between 5 MHz and 2200 MHz; this allows accurate measurements on all analogical tele-
vision standards, FM carrier waves and the various digital standards DVB-C/C2, DVB-T/T2/T2Lite, DVB-S/S2
and DSS.
-He does Level measurements in average, peak and power according to the selected standard
-Optical power measurements are made on the 3 bands
-Conversion of an optical signal (optical head, FTH-type cable) into a RF signal RF within the band of the field
measurer
-In Measurement Plan mode, they scan up to 50 setups at the same time and compare them to decision
levels (min / max).
- Equipped with an efficient Bit Error Rate measurement (various BER, MER), they allow the full validation of
digital transmissions DVB-T/T2/T2Lite, DVB-C/C2, DVB-S/S2 and DSS.
- Providing a Constellation diagram for digital standards, the detection and display of Echoes and pre-ech-
oes permit to complete this analysis.
- You can display the digital terrestrial or satellite TV (free programs) under SD or HD.
- You can hear digital sound through integrated loudspeakers.
-Designed for use on field, it is compact (less than 2 kg battery included), autonomous (battery pack and quick
charger), equipped with a LCD 7'' touchscreen (capacitive).
- The high memory content allows the storage of many configurations, measurements and spectrum curves.
-The appliance fully remote-controlled through USB and ETHERNET connections via a computer.
p.
19