Display Setup; Memory Options - B&K PT 3 series II Owner's Manual

Display Setup

Set the intensity of the front panel's alphanumeric display.
From Remote
1 From setup menu:
­ V
or
2 SEL or ENTER
ˆ ‡
3
(BAL L) or (BAL R)
4 MENU

Memory Options

Your Preamplifier Tuner continually saves any settings you have made even if power is lost. However, you may
wish to save a backup of your settings in case of inadvertent changes to them.
From Remote
1 From setup menu:
­ V
or
2 SEL or ENTER
ˆ ‡
3
(BAL L) or (BAL R)
4 SEL or ENTER
5 SEL or ENTER
6 MENU
7 MENU
8 MENU
To restore backup settings perform the same procedure as described above but select restore instead of backup.
If you have never made a backup, then performing a restore will call back the original factory settings.
From Front Panel
From setup menu:
(TUNE +) or (TUNE -)
( ENTER)
VOLUME KNOB
—
(PRESET) and (ENTER)
From Front Panel
From setup menu:
(TUNE +) or (TUNE -)
( ENTER)
VOLUME KNOB
( ENTER)
( ENTER)
—
(PRESET) and (ENTER)
—
(PRESET) and (ENTER)
—
(PRESET) and (ENTER)
22
Action
move to display setup
enter display setup menu
set display bright, medium, or dim
return to setup menu
Action
move to memory options
enter memory options menu
select backup or restore memory
activate selected memory operation
confirm selected memory operation
note: this takes a few seconds
return to setup menu
return to main menu
return to normal operation
P/N 13010 REV 0005