Choosing A Source; Headphone Mode - B&K PT 3 series II Owner's Manual

CHOOSING A SOURCE

In general, the selected source will appear at the PREAMP outputs and the TAPE output.
From Remote From Front Panel
U
desired source
TAPE MONITOR - If you have an analog three-head cassette or reel-to-reel analog tape recorder you may wish to
use TAPE MONITOR, which allows you to hear exactly what is on the tape as you are recording.
From Remote From Front Panel
U
desired source
U
TAPE

HEADPHONE MODE

Headphone Mode allows you to operate your Preamplifier Tuner with the CONTROL OUT set to off. This feature
allows your Preamplifier Tuner to turn off external amplifiers or powered sub woofers with compatible CONTROL
inputs. Your Preamplifier Tuner has the capability to be set up to allow for other control out functions (see
ADVANCED FEATURES).
From Remote
1 MODE

(SOURCE) step to source
%!
(SOURCE) step to source
(SOURCE) step quickly to TAPE
From Front Panel
Can't do directly from front panel
refer to MENU operation
 
Action
select desired source
 
Action
select desired source or TUNER
source will appear on TAPE output
wait a few seconds while Preamplifier Tuner analyzes
selected source
select TAPE monitor
TAPE will appear at the preamp's output
Action
toggle headphone on/off
13
P/N 13010 REV 0005