Download Print this page

NutriMill Classic Quick Start Manual

Hide thumbs Also See for Classic:

Advertisement

QUICK START GUIDE
We are excited you joined the
use, care for, and maintain your new NutriMill Classic for many years to come!

Getting Started

1.
Always remove hopper
extension ring from flour
bowl before milling.
2.
FIRST TIME USE:
2 cups of wheat or other hard
grain, then discard the flour
and clean the bowl. This will
eliminate any contaminates
the mill may have obtained in
the manufacturing process.
3.
Attach separator cup. After
milling, empty the separator
cup each time.
4.
Insert air filter on top of bowl
lid. Make sure the filter is thor-
oughly dry before using.
5.
Twist bowl lid counterclockwise
onto top of flour bowl.
6.
Lock on hopper extension
ring, found packed in the flour
bowl. To attach: with mill facing you, insert tab at the front right then move clockwise
and insert the next two tabs.
7.
Fill with grain and replace hopper lid.
8.
Plug in machine and turn on by turning lower knob to the right. Always start the mill
on high speed for the top knob.
9.
Let run. When milling is done, let mill run for 5 seconds.
How to Clean Your Mill
1.
Remove bowl and tap lid a few times
to help settle the flour in the bowl
and release flour from the bottom of
the lid. Twist lid to release.
2.
Unplug the mill and wipe or brush
away any flour residue from the mill.
Welcome to the Family!
Mill at least
do not immerse milling unit in water
Family. These simple tips will help you
Hopper Lid
Hopper
Grain Inlet Cover
Variable Motor Speed
Control Knob
Variable Texture
Control Knob
Circuit Reset Button
(Red)
Separator Cup
Flour Bowl (Canister)
3.
Hand-wash the plastic bowl and lid.
DO NOT put them in the dishwasher.
High-heat dishwashers can warp the
plastics.
4.
Relubricate the bowl lid gasket after
washing.
Hopper
Extension Ring
(stored in flour bowl)
Milling Module Unit
Inlet Grommet*
Bowl Lid
Rubber Gasket
Air Filter*
Base

Advertisement

loading

Summary of Contents for NutriMill Classic

  • Page 1: Getting Started

    QUICK START GUIDE Welcome to the Family! We are excited you joined the Family. These simple tips will help you use, care for, and maintain your new NutriMill Classic for many years to come! Getting Started Always remove hopper Hopper Lid...
  • Page 2 Be cautious milling any grains with high oil or moisture content. For additional tips and accessories, visit boschkitchencenters.com For assistance with your Grain Mill or its accessories, contact classic L’Chef Service Department: Toll Free: 1.877.267.2434 or service@lchef.com...

This manual is also suitable for:

760200