Service Timer; Monitor Active - Vidicode Anuncio PRI Manual

6.21 Service timer

The Service timer determines the performance of the network
connection. Default the Service timer is set to Automatic. Changing the
setting should only be done when advised by a service engineer to solve
problems.
Server timer:
NEXT
• Press CHANGE CHANGE CHANGE CHANGE to change the Service timer.
The following settings are available:
S1-S5, F1-F4 and U1-U4. Where S stands for Slow, F for Fast and U for
Ultra fast.
• Press NEXT NEXT NEXT NEXT to move on to the next menu item.

6.22 Monitor active

The monitor function allows you to listen to the conversations that take
place. This requires the RTR Call Monitor software, which connects with
the Voice Server over the network.
Monitor active:
• Press CHANGE CHANGE to enable the Monitor.
CHANGE CHANGE
• Press NEXT NEXT to move on to the setting of the Monitor password.
NEXT NEXT
The monitor password is used to log on to the Voice Server. This
password must also be set in the RTR Call Monitor software.
Monitor pwd:
• Press CHANGE CHANGE to enter a password
CHANGE CHANGE
• Press STOP STOP to exit the network configuration.
STOP STOP
48 Manual Voice Server Anuncio © 2009-2014 Vidicode®
Auto
CHANGE
No
CHANGE
0000
CHANGE
STOP
STOP
STOP