Dhcp Server; Ip Address - Vidicode Anuncio PRI Manual

6.6 DHCP server

In case a DHCP server is used on the network the DHCP server option
must be enabled. In case a DHCP server is not used on the network it
must be disabled.
DHCP server:
NEXT
• Press CHANGE CHANGE CHANGE CHANGE to enable DHCP server.
DHCP server:
NEXT
• Press NEXT NEXT NEXT NEXT to move on to the next menu item.
When a DHCP server is used, the IP and Gateway addresses are
automatically assigned. Without DHCP server you must manually enter
these IP addresses.

6.7 IP address

As part of the network the Voice Server needs an IP address. When a
DHCP server is used (see previous item) the DHCP server will assign an IP
address. When a DHCP server is not used a static IP address must be
assigned to the Voice Server.
IP addr:
NEXT
• Press CHANGE CHANGE to enter the IP address
CHANGE CHANGE
IP addr:
STORE
Use the numerical keys to enter the IP address.
• Press STORE STORE to save the IP address. STORE STORE
40 Manual Voice Server Anuncio © 2009-2014 Vidicode®
Yes
CHANGE
No
CHANGE
0.0.0.0
CHANGE
»00.000.000.000
STOP
STOP
STOP
CANCEL