System Messages - Vidicode Anuncio PRI Manual

Note: A queue or busy-action can only work if the PBX returns the busy- Note
Note Note
status if that called phone is occupied.
Note1: Note1
Note1 Note1
A queue or busy-action can only work if the PBX returns the busy-status
on ISDN-level if that called phone is occupied.
Note2: Note2 Note2 Note2
It is possible to define a call queue for multiple dial-in numbers
(different called phone numbers).
The 'phone number' in the transfer action must start with "#" ("#1"
defines queue 1). The original called number is not changed then when
the PBX is dialed.

3.3 System messages

System messages are predefined messages such as beeps and call queue
notifications used by the Announcer. You can record or import new
audio for these system messages. See also Chapter 9
The following System Messages are in use:
039 = "One moment please..." (used after an input when waiting for a
response from the network)
040 = Special Notification Message that can be included in recorded
calls.
042 = Answering Machine Beep
043 = On Hold Beeps used in the Call Queue
044 = Phone Alerting Tone
Manual Voice Server Anuncio © 2009-2014 Vidicode® 27