Ntp Server; Ntp Port - Vidicode Anuncio PRI Manual

6.17 NTP server

If there is a possibility on your network to give the Voice Server access to
a NTP (Network Time Protocol) server, it is recommended you enable it
because it will give the recorder an accurate time reference.
NTP serv:
NEXT
• Press CHANGE CHANGE to enter the NTP server.
CHANGE CHANGE
NTP serv:
STORE
Use the numerical keys to enter the NTP server.
• Press STORE STORE to save the NTP server.
STORE STORE
• Press NEXT NEXT NEXT NEXT to move on to the next menu item.

6.18 NTP port

NTP port is the port number through which the recorder as a client can
connect to the NTP server. The NTP port is default set to 123. Consult the
network manager for the port number.
NTP port:
NEXT
• Press CHANGE CHANGE to change the NTP server port number. CHANGE CHANGE
NTP port:
Use the numerical keys to enter the NTP port number.
• Press STORE STORE to save the FTP server port number.
STORE STORE
46 Manual Voice Server Anuncio © 2009-2014 Vidicode®
0.0.0.0
CHANGE
»00.000.000.000
123
CHANGE
»
STOP
CANCEL
STOP
CANCEL