a
Push the memory module retention tabs on both sides of the memory module.
b Lift the memory module from the memory module connector on the system board.
Identifier
Status
Installing the memory module
1
Align the notch on the memory module with the tab on the memory module connector.
2
Press the memory module until the memory module retention tabs click into place.
3
Install the:
a
Cover
4
Follow the procedure in
Identifier
Status
Power supply unit
Identifier
Status
Removing power supply unit
1
Follow the procedure in
2
Remove the:
a
Cover
b
Cooling shroud
3
Removing the Power supply unit (PSU):
a
Disconnect the PSU cables from the connectors on the system board.
28
Removing and installing components
GUID-13CEBF02-3193-4AA6-9A16-9881311B3E56
Released
After working inside your
computer.
GUID-F8164337-4D5F-47F7-AEB2-E426D33BEB4B
Released
GUID-316844EC-0A6A-4402-865F-83B2C9A7809B
Released
Before working inside your
computer.