Location; Reversing The Door Swing - Currys Essentials CIF60W12 Instruction & Installation Manual

INSTALLATION

Location

When selecting a position for your unit you should make sure the floor is flat and firm, and
the room is well ventilated with an average room temperature of between 10°C and 32°C.
Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct
sunlight as it may increase the electrical consumption. Extreme cold ambient temperatures
may also cause the unit not to perform properly. This unit is not designed for use in a garage
or outdoor installation.
Ensure that a mains supply socket is within reach of the unit where it is to be installed and is
easily accessible, or has an easily accessible double pole switch in the fixed wiring allowing
full disconnection. If no socket or switch is available contact a qualified electrician to install
one.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
• All parts removed must be saved to do the reinstallation of the door. You should
rest the unit on something solid so that it will not slip during the door change
process. Do not lay the unit flat as this may damage the coolant system. Ensure the
unit is unplugged and empty.

Reversing the Door Swing

Tools required: Phillips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
• This must be done before fitting the cabinet outer door.
• Adjust the two levelling feet to their highest position.
• To take the door off it is necessary to tilt the unit backwards. You should rest the
unit on something solid so that it will not slip during the door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
1. Remove the 4 blanking plates from the
outside of the fridge door. Ensure you do
not damage the blanking plates as they
will be required to cover the other holes
when the hinges are removed.
* All images are for indication only; please refer to your individual unit for actual item.
5