Table of Contents
Advertisement
Connection example
Connection example – JSHD4-2-AB-A connected to RT6 safety relay via the 12-pin cable HK10
Handle
JSHD4-2
Note: The anti-cheat-board is connected in series with the first 3-position button (S1). The monitored reset (input
X1) is required to maintain the highest level of safety. The top and front buttons are not connected in the figure, but
can be connected in line with user needs.
2TLC172072M0201, rev. F
2018-06-01
Test/Auto
reset
12
Anti-cheat-board
Anti-cheat
Bottom part
AB
Cable
HK10
Safety relay
RT6 24 VDC
www.abb.com/jokabsafety
Advertisement
Table of Contents
