Table of Contents
Advertisement
Anti-cheat-board
The anti-cheat-board (optional) can be connected individually or in series by one of the 3-position buttons (S1 or
S2).
Warning!
When the anti-cheat-board is connected in series with a 3-position push button, one of the following two options
are implemented to ensure the 3-position push button functions correctly:
1. Concurrent control of the two channels when enabling the two switches.
2. Monitored reset of the 3-position button connected in series with the anti-cheat-board.
Bottom parts
Electrical connections – AB
Bottom part – AB:
12-pin Cannon male connector
A ) S1 – Common*
B ) S1 – Enabled
C ) S2 – Common
D ) S2 – Enabled
E ) S1 – Disabled
F ) S3, S4 – Common
G ) S3 – Enabled
H ) S4 – Enabled
J ) +24 VDC (anti-cheat)
K ) 0 VDC (anti-cheat, LED 1, LED 2)
L ) Anti-cheat – Common
M ) Anti-cheat – Operator detected
Note: 12-pin Cannon connector, connected internally to fit the regular monitoring unit. Anti-cheat-board is an
option.
Electrical connections – AC
Bottom part – AC:
5-pin M12 male connector
S2 – Common
1 ) Brown:
S1 – Common
2 ) White:
S2 – Enabled
3 ) Blue:
S1 – Enabled
4 ) Black:
S1 – Disabled
5 ) Grey:
Note: 5-pin M12 male connector. Designed exclusively for top part JSHD4-1. Internally connected for adapting to
safety relays in the RT series and Pluto safety PLC. Anti-cheat-board is not an option.
2TLC172072M0201, rev. F
2018-06-01
1
2
Male pin in 2 x
8 Molex male
12-pin Cannon
male connector
A
B
* Note: The COM signal must be +24 VDC to allow the LEDs and anti-cheat-board
to function properly.
Note:
Connections in compliance with factory-made units.
Proposed use following manual assembly. Cable
colours for each pin as per list.
3
4
5
6
7
8
9
C
D
E
F
G
H
J
5 x individual
wires
5-pin M12 male
connector
M12 5-pin male
connector seen
from the cable side
8
10
11
12
13
14
15
16
K
L
M
1
2
3
4
5
M12 5-pin male
connector seen
from the cable side
www.abb.com/jokabsafety
Advertisement
Table of Contents
