2-1. SELF-DIAGNOSIS FUNCTION
2-1-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the LCD screen what to do.
This function consists of two display; self-diagnosis display and ser-
vice mode display. Details of the self-diagnosis functions are provided
in the Instruction manual.
LCD screen
C
Repaired by:
C : Corrected by customer
Indicates the appropriate
E : Corrected by service
step to be taken.
engineer
E.g.
13 ....
32 ....Turn on power again.
DSC-HX60/HX60V
2. TROUBLE SHOOTING
Blinks at 3.2 Hz
0 0
3 2
Block
Detailed Code
Refer to "2-1-3. Self-diagnosis Code Tabl e".
Format the "memory card".
2-1-2. Self-diagnosis Display
When problems occur while the unit is operating, the LCD screen
shows a 4-digit display consisting of an alphabet and numbers,
which blinks at 3.2 Hz. This 5-character display indicates the "re-
paired by:", "block" in which the problem occurred, and "detailed
code" of the problem.
2-1