8. Remove the Gear B.
9. Remove the Gear A.
10. Remove the Gear WH.
11. Remove the two screws to detach the DC Motor Worm Assy.
12. Insert the Gear B and turn it clockwise to set the lens unit in the TELE end state.
Note: Turn the Gear B to the maximum.
13. Release the flexible board from the boss and pull the Flexible Board out of the hole.
Gear B
DSC-HX60/HX60V
Gear B
Gear A
Gear WH
Screws
Flexible Board
Boss
Flexible Board
4-11
DC Motor Worm Assy
Hole