Base; Upper Hose Wrap; Lower Hose Wrap; Long Screws - Bissell STAINEXPERT 6 User Manual

Assembly
WARNING
Do not plug in your deep cleaner until you are familiar with all instructions
and operating procedures.
Your deep cleaner comes in four
easy-to-assemble components and
an accessory bag.
- Upper Handle

- Base

- Upper Hose Wrap

- Lower Hose Wrap

1
1
Slide handle assembly onto lower body
and secure with two long screws.
3
1
Attach lower hose rack by sliding it in place on the lower
body assembly and securing it with 2 short screws.
Attach Tough Stain tool to end of hose.
2
Attach upper hose rack to back of upper
handle by pushing into open slots and
sliding down until it snaps into place.
3
2
The only tool you will need to assemble
your deep cleaner is a Phillips screwdriver.
2
4
Wrap flex hose around
hose rack and secure
it into notched out
holder as shown.
www.BISSELL.com
5