Yamaha AVENTAGE RX-A3080 Owner's Manual page 70

MAIN 2 3 4 MAIN 2 3 4
z
SLEEP SLEEP ZONE ZONE
PARTY PARTY T T
PURE DIRECT PURE DIRECT HDMI OUT HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
5 5 6 6 7 7 8 8
INPUT INPUT
TUNER TUNER NET NET USB USB BLUETOOTH BLUETOOTH
PRESET PRESET
RED RED GREEN GREEN YELLOW YELLOW BLUE BLUE
SETUP
Cursor keys
ENTER
TOP TOP POP-UP POP-UP
HOME HOME
MENU MENU / / MENU /MENU
AI AI
SUR. DECODE SUR. DECODE
PROGRAM PROGRAM VOLUME VOLUME
ENHANCER ENHANCER
STRAIGHT STRAIGHT
MEMORY MEMORY
TUNING TUNING BAND BAND TUNING TUNING
■ Using other connection methods
If your wireless router (access point) does not support WPS push button
configuration method, follow the procedure below to configure the
wireless network settings.
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display video
from the unit (HDMI OUT jack).
Y
Operations with TV screen are available only when your TV is connected to the
unit via HDMI.
3
Press SETUP.
4
Use the cursor keys to select "Network" and press ENTER.
5
Use the cursor keys to select "Network Connection" and
press ENTER.
6
Use the cursor keys and ENTER to check "Wireless (Wi-Fi)"
and select "OK".
X
The checkmark indicates the current setting.
7
Use the cursor keys and ENTER to select the desired
connection method and select "NEXT".
The following connection methods are available.
WPS Button
Share Wi-Fi
Settings (iOS)
Access Point Scan
Manual Setting
PIN Code
70
En
You can set up a wireless connection with the WPS button
while viewing the TV screen. Follow the instructions
displayed on the TV screen.
See "Sharing the iOS device setting" (p.68).
You can set up a wireless connection by searching for an
access point. For details on settings, see "Searching for an
access point" (p.71).
You can set up a wireless connection by entering the
required information (such as SSID) manually.
For details on settings, see "Setting up the wireless
connection manually" (p.71).
You can set up a wireless connection by entering the unit's
PIN code into the wireless router (access point). The
method is available if the wireless router (access point)
supports the WPS PIN code method. For details on settings,
see "Using the PIN code" (p.72).