CYLINDER HEAD/CYLINDER/PISTON
Setting the timing
- Rotate the flywheel magneto to bring the "T"
mark in front of the crankcase boss (C).
- Fit the gear in the chain on one of the sides.
- Using a tool with a small diameter, finish
fitting the chain around the gear.
- Install the camshaft gear.
- Make sure the mark (A) of the camshaft
gear is aligned with the mark (B) of the
cylinder head.
- If necessary, dislodge the gear from the
camshaft without removing it and move the
chain around the gear on the required side.
38
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
C
B
A A